SNOWTREK.org

Most stuff has been covered but here are a few that I did not see mentioned. I try to always have a tarp, it's nice to lay on if you have to and it can keep your tools visible if they are out. I once forgot my chainsaw and ever since I don't go without an ax, if the saw dies I want a way out! Spare ...

You need a hand with the plumbing? I was going to be doing a bit of work on my place but if you need help just give me a call!

I must have been in high range or 4th low because I was going about 40 in the clip when I showed my speedo, it's where I am slowing a bit. I did cut it out of the video because if not everyone would be carsick!

"It's a Ligar, it's my favorite animal"

It's crap quality off of my phone

Carma,
Had to go get the wife from work, it's a 30 min round trip normally and it took me 2 hours and 10 min.
It's amazing how bad people drive.

I may call tomorrow if I am close and sick of driving. I don't think I am really happy about going to Bellingham tomorrow.
And in all seriousness how does the Jetta do? Tanya's did fine but her Passat would not go anywhere.

I hope it holds as well but I don't know if Sarah will be able to get out in her Jetta if there is too much! The roads in front of my house are wet, it's 31* and it's been snowing since 7am. I do hope that WWU is open tomorrow since I have to go there and take a test.... I think I will leave really ...

It was a great day, now for the fun part of fixing a few minor problems and figuring out why the rear end of my bronco is shaking like crazy at any speed over 50. It was a slow ride home, I guess that is what I get for leaving it packed from the move for four months and unpacking it two days before ...

Nobody wrote: yet

EXACTLY yet, I hope to be snow wheeling by Thanksgiving :fingerscrossed:

Can't use the house for an excuse, I am not! Get ready!

So is it open?

I love the conversion, it's a power unit I built from scavenged parts and a cylinder from Egay so I am about $100 into it and I have quick disconnects on the unit so I can add a press when I ever get around to building one and all I will have to do is plug it in.

The rear springs started as 79 F150 stock take outs from a friends truck. When I changed the bushings I took out the adjusters I originally had and installed some KbarS springs that I got in trade, they are 3.5" lift EB front springs and nothing special IMO from a company that has been out of b...

I originally did it because it was cheaper than leaf springs. It's a three link with a upper wishbone instead of a pan hard , I don't remember how long the links are. The links are 1 1/2" 1/4" wall DOM tubing, some say it's undersized but it's worked great for me, I did have a link bend in...

Ok I will try to answer a few of your questions first the Dana 60, yes both of ours are 5 bolt but you could change that easy if you wanted. I actually have one that is EB stock width that I am going to be selling and I did a quick breakdown of the cost and it's about $1885 if you can do all the set...

"it's only a little cliff" lol
I did buy some polypropylene base layer pants and a nice Helly Hansen waterproof coat so at least next time we go out in a 32* monsoon I will be warm and dry.

I was owned by the ice, if I took my foot off of the brake it slid, it took all 4 tires to hold it and I was in 2wd! thanks Matt for locking in my hubs for me and posting a picture of it LOL. It was the wettest most miserable hangover run in recent years but it was still fun and my dog did well for ...

Christmas was good! Snow shoes that came with poles and a bag as well as some gators.

Here are a few of me.