Got word from the ranger.. it's open!! I'm heading up tonight at 4pm. Whos in???
(347) 559-8223
Chris
Pilchuck is open!!!
Re: Pilchuck is open!!!
Well I didn't make it far with the truck..
this wheel I welded a safety bead on but with no wire, it didn't work out as well. Blew off at 2psi on the outside.
The other 3 held up fine though (had the small wire welded on), Just need to weld a piece of wire on the bead and it should be good again.
Luckily it happened in the first 10ft of snow, so I just backed up to the dirt.
but I still made it to the top on skis
this wheel I welded a safety bead on but with no wire, it didn't work out as well. Blew off at 2psi on the outside.
The other 3 held up fine though (had the small wire welded on), Just need to weld a piece of wire on the bead and it should be good again.
Luckily it happened in the first 10ft of snow, so I just backed up to the dirt.
but I still made it to the top on skis