Fubars snow jeep build
Re: Fubars snow jeep build
Haven't given up yet..
Here's some more pictures of what I'm doing since the last update
Pushing to get it going by summer 2017
40" procomp tires
~2000 dodge caravan seats
front leafs/ axles bolted up
trail gear creeper joints are on the shelf for the 4 link rear
motor is 95% re assembled
Here's some more pictures of what I'm doing since the last update
Pushing to get it going by summer 2017
40" procomp tires
~2000 dodge caravan seats
front leafs/ axles bolted up
trail gear creeper joints are on the shelf for the 4 link rear
motor is 95% re assembled
Re: Fubars snow jeep build
Coming together very nicely. Can't wait to see the end result. Great work.
WINTER IS HERE
Re: Fubars snow jeep build
Will have to plan a trip to WA when its road worthyNobody wrote:Coming together very nicely. Can't wait to see the end result. Great work.
Re: Fubars snow jeep build
This was last weekend in my back yard. It's snowing hard today but unfortunately we got a bunch of wind this week so it's doubtful if we can get out wheeling. Between the snowmobiles and the drifts I think we're already done for the season until spring. We went from nothing to a whole bunch in one fell swoop!
70 Bronco
79 Bronco
79 F-150 4x4
79 Bronco
79 F-150 4x4
Re: Fubars snow jeep build
small update.
very small.
Tacked the caps on the motor mount brackets
Also decided I'm going with the NWF Eco Box for a underdrive infront of my NP205 (32 spine throughout !)
1/2 way through re building the front D60 - did the u Joints. just waiting on a sale to order some gear sets.
Kicking around ~4.10 -5.13's .... any input from you guys who use their rigs? - im just a jack stand wheeler heh
very small.
Tacked the caps on the motor mount brackets
Also decided I'm going with the NWF Eco Box for a underdrive infront of my NP205 (32 spine throughout !)
1/2 way through re building the front D60 - did the u Joints. just waiting on a sale to order some gear sets.
Kicking around ~4.10 -5.13's .... any input from you guys who use their rigs? - im just a jack stand wheeler heh
Re: Fubars snow jeep build
Looking great! For gears, I feel pretty strongly about gearing to the desired cruising rpm. I prefer Dana/spicer. I've picked up used gear sets the last two times. I prefer used OEM over some of the questionable brands out there these days.
WINTER IS HERE
Re: Fubars snow jeep build
Thanks!Nobody wrote:Looking great! For gears, I feel pretty strongly about gearing to the desired cruising rpm. I prefer Dana/spicer. I've picked up used gear sets the last two times. I prefer used OEM over some of the questionable brands out there these days.
I'm sure I will regret going with the G2 brand gears, but its a balance between time before I can drive this thing vs budget.
Trying to make high quality parts where I can and buy slightly less expensive parts. We'll see. Just want to drive the thing before I sell or kids come.
I used the gear calculator again and came up with at ~2200 rpm I can do 60 mph, with 4.56 gears
might be the best choice.
Trying hard to get to a roller with driveline installed by summer.
Re: Fubars snow jeep build
small update.
body mounts in order, now i need to figure out where to locate it.
I was going for that retro '68 vibe styling
body mounts in order, now i need to figure out where to locate it.
I was going for that retro '68 vibe styling
Re: Fubars snow jeep build
Holy shoot it’s been a while.
I forgot about this site!
Almost done, just painting and putting it back together.
Hopefully wheeling this winter!
I forgot about this site!
Almost done, just painting and putting it back together.
Hopefully wheeling this winter!
Re: Fubars snow jeep build
Few more..
Have more pictures on Instagram @twinpeaksjeep
Have more pictures on Instagram @twinpeaksjeep
Re: Fubars snow jeep build
Hey, thanks for the update. I hope you get it running by the time the snow flies. Stop by and share some pics!
WINTER IS HERE
Re: Fubars snow jeep build
Finished the paint last weekend, brought it back home. Rock guarding the armor panels this weekend. then I have some wiring, axle gearing and drive shafts... along with all the other little stuff
- Attachments
-
- 65626723537__07F977D2-273B-4239-B6B1-C1E140A7FB51.jpg (97.77 KiB) Viewed 5703 times
Re: Fubars snow jeep build
Hey, noticed I haven't updated the build progress in a while.
Sometimes I can't keep track on these 12 year projects
Here's a few photos from last fall. As it stands now it is about 90% complete.
Just need a few things like: paint hood yellow, ebrake cable hooked up, speakers installed, front fender liners, on board air lines hooked up for the ARB front and rear lockers.
Then inspection and hopefully can drive it around a bit!
Its entered in a local car show beginning of April, so I got a bit of wind in my sails to wrap up the small items.
hope you're all doing OK
cheers,
Sometimes I can't keep track on these 12 year projects
Here's a few photos from last fall. As it stands now it is about 90% complete.
Just need a few things like: paint hood yellow, ebrake cable hooked up, speakers installed, front fender liners, on board air lines hooked up for the ARB front and rear lockers.
Then inspection and hopefully can drive it around a bit!
Its entered in a local car show beginning of April, so I got a bit of wind in my sails to wrap up the small items.
hope you're all doing OK
cheers,
- Attachments
-
- jeepster 1.jpeg (111.8 KiB) Viewed 1039 times
-
- jeepster 2.jpeg (99.38 KiB) Viewed 1039 times
-
- Jeepster hard top.jpeg (127.78 KiB) Viewed 1039 times
Re: Fubars snow jeep build
Heres a build video with some more pictures too
Re: Fubars snow jeep build
got 2nd in 4x4 category at a local show
- Attachments
-
- IMG_1432.jpg (89.11 KiB) Viewed 830 times